Plumbing Woes: How To Set Sewer Pipelining Right?

 Plumbing Woes: How To Set Sewer Pipelining Right?

Sewer pipes are of utmost importance for the drainage of every household and building. With time, the pipelines have the probability of wearing out and breaking, thereby causing damage to properties. As a homeowner, you will know how frustrating a leak or backup of sewer lines can be. It sends out more trouble with the constant unpleasant smell and mess.

There might be times when it becomes tough to figure out the root cause of the sewage issue. So you need to prevent and mitigate and prevent any further sewer line issues. And for that, you need to pinpoint the leading cause of sewer line damage. You must know that Active Plumbing hosts experienced professionals who can fix everything at ease.

But before hiring professionals, you must know that various things and factors can cause leaks and damage to your sewer line. So after you have spotted the leading cause of destruction, you need to repair or replace your sewer pipeline. Make sure you hire a professional and let them inspect thoroughly before repairing.

Know-How to Repair, Replace, and Set Sewer Pipelining Properly?

Having a well-maintained sewer line and drainage systems will provide a comfortable environment in and around your home. If there is any leak or line backup, it requires immediate assistance for repair and replacement. But before that, you need to learn about the leading cause of the damage to your sewer pipeline.

Through this article, you will learn the causes of sewer line damage. Later you will also know how they can be repaired, replaced, and set correctly. Read through!

What are the Causes for Damaging Sewer Lines?

From rusty pipes to clogged ones collated, sewer line damage is a few causes.

  • Rusty Pipes

Pipes are usually made from steel and cast iron and are galvanized to eliminate rust. But due to the build-up of magnesium and calcium, there are higher risks that the pipes will rust. And if it is left untreated, it might lead to susceptible cracks and leaks.

  • Roots of Large Trees

Tree roots tend to follow the flow of water as they grow. And when there is a small leak in the pipe, the water seeping from the leak attracts the roots. So the trees begin to wrap around and break into the lines, thereby clogging and weakening it.

  • Extreme Climate

Extreme climates like snowfall or extreme cold can freeze the pipes. The ice expands within the line and can rupture them. Extremely heated temperatures can also burst the sewer pipelines.

  • Debris and Waste Materials Clog

Sewage lines can only handle human waste and toilet paper. But if you tend to flush wrappers and sanitary napkins, it cannot disintegrate. Since these items cannot clear out, they can cause a blockage within the sewer lines.

How Will You Know that Your Sewer Line Has Been Damaged?

You will not want your sewer lines to get damaged again. So it would be best if you took immediate action when you noticed the following signs.

  • Clogged Drainage

A clogged pipe that leads directly to a faucet of your home will not allow fluent water passage. If you ever hear gurgling sounds in your toilet, make sure you contact a plumber.

  • Foul Smell and Flooded Yard

Leaks in sewer pipes can send a foul smell through the grass on your lawn. Sometimes the broken pipe might begin to pool water that slowly fills your yard. When you notice anything of this sort, get in touch with your plumber.

  • Water Contamination and Damage

Sometimes you can notice that molds are spreading across the walls and floors of your room. It is mainly because of the leaks in drainage lines.

How to Fix and Set Your Sewer Pipeline Properly?

There are two ways a plumber can repair a sewer line. Either by digging an enormous trench or with little or no digging. Let’s check out the two sewer pipeline fixing procedures.

  • Pipe Bursting

This technique is used when the sewer line has been extensively damaged. A cone shaped bit is fed through your existing tube, thereby destroying it and replaced with a new one. This process takes lots of time and is very expensive.

  • Pipe Lining

When there is minimal damage to your sewage pipe, technicians will undertake the method of pipelining. An inflatable tube is inserted and inflated within the existing line. The epoxy hardens and cures the line and repairs the leak.

To Conclude

If your sewage pipeline has been entirely damaged, you need to fix it instantly. The sewage pipe repair cost is a bit expensive but will benefit you in the long run.

Latest Posts